3.5 Stainless Steel Intake Elbow & Ccv Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel


3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel


3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel



3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel   3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel

3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel. For years Cummins has vented crankcase gasses to the atmosphere.

With the new 6.7L emissions systems they've switched to a CCV or Closed Crankcase Ventilation system. The CCV system dumps the crankcase gasses into your turbo inlet post air filter which causes an oily buildup on the turbo compressor wheel. If crankcase blow-by is higher than normal these gasses can also coat the inside of the intercooler which lowers it's efficiency. The Open Breather Kit converts the closed system back to an open breather.


This eliminates the oil buildup on the turbo compressor and maintains intercooler cleanliness. 90° vent hose encourages oil drain back and helps eliminate drips. This kit does retain the stock CCV filter.
Billet Plug for air inlet connection. The PPF 3.5" Intake Manifold for your 2007.5-2018 Dodge 6.7L Cummins is built around a 3.5" inlet that smoothly transitions to two 3 mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum.
Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower egt's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a gasket and hardware to make installing this intake extremely easy.
Unobstructed 3.5" inlet to two 3" mandrel bent tubes. Fully TIG welded with precise settings to produce optimal penetration without impacting airflow. 50-200 degrees F drop in EGT's. Significant gain in throttle response. Note: You will need to delete all of your factory emissions equipment as this manifold does not have provisions to use any of it. This manifold is for off road use only. This product will work with dual CP3's. We value your business and we are not satisfied until you are. Rudy's Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy's Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging.

If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation.

This product is NOT for sale or use in California. The item "3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel" is in sale since Friday, February 22, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems". The seller is "rudys_performance_parts" and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Turks and caicos islands, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Interchange Part Number: Pusher ATS aFe Banks 3.0 3 Inch Boot Boots
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Manufacturer Part Number: DP0126_DP0147
  • Brand: PPF
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm



3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel   3.5 Stainless Steel Intake Elbow & CCV Kit For 07.5-18 Dodge 6.7 Cummins Diesel